National Standard Plumbing Code Illustrated 2015

National Standard Plumbing Code Illustrated 2015  ,The development of a recommended code of plumbing practice, design, and installation, including the establishment of performance criteria predicated on the need for protection of health and safety through proper design, installation, and maintenance of plumbing systems. This scope excludes the development of specific standards related to the composition, dimensions, and/or mechanical and physical properties of materials, fixtures, devices, and equipment used or installed in plumbing systems

To provide practices and performance criteria for the protection of health and safety through proper design and installation of plumbing systems.

You can also Read International plumbing Code 2018 Edition-IPC 2018

National Standard Plumbing Code – Illustrated Content

• Foreword
• Introductory Notes
• National Standard Plumbing Code Committee
• Administration
• Basic Principles
•  1 Definitions
•  2 General Regulations
• 3 Materials
•  4 Joints and Connections
•  5 Traps, Cleanouts and Backwater Valves
•  6 Liquid Waste Treatment Equipment
•  7 Plumbing Fixtures, Fixture Fittings and Plumbing Appliances
• 8 Hangers and Supports
• 9 Indirect Waste Piping and Special Wastes
•  10 Water Supply and Distribution
•  11 Sanitary Drainage Systems
•  12 Vents and Venting
• 13 Storm Water Drainage
•  14 Special Requirements For Health Care Facilities
•  15 Tests and Maintenance
•  16 Regulations Governing Individual Sewage Disposal Systems for Homes and Other Establishments Where Public Sewage Systems Are Not Available
•  17 Private Potable Water Supply Systems
• 18 Mobile Home & Travel Trailer Park Plumbing Requirements
•  19 Referenced Standards

National Standard Plumbing Code – Illustrated Appendixes

• A: Sizing Storm Drainage Systems
• B: Sizing the Building Water Supply and Distribution Piping Systems
• C: Conversions: Metric to U.S. Customary Units
• D:Determining the Minimum Number of Required Plumbing Fixtures
• E: Special Design Plumbing Systems
• F: Requirements of the Adopting Agency
• G: Green Plumbing and Mechanical Code Supplement (Excerpts)
• H: Combined Building Drains and Building Sewers
• I: Fixture Unit Value Curves for Water Closets
• K: Flow in Sloping Drains
• L: An Acceptable Brazing Procedure for General Plumbing
• M: Converting Water Supply Fixture Units (WSFU) to Gallons Per Minute Flow (GPM)
• Alphabetical Index

Download

1st Link here

2nd Link Here