ANSI/ASHRAE Standard 33 2016 Edition
ASHRAE Standard 33-2016 Methods of Testing Forced-Circulation Air-Cooling and Air-Heating Coils presents a method of test for use in laboratory testing of forced circulation air-heating and air-cooling coils. The 2016 edition of this standard was updated with assistance from the members of the product subsection Forced Circulation Air-Cooling & Air-Heating Coils (ACHC) at Air-Conditioning, Heating and Refrigeration Institute (AHRI). This method of test is used in conjunction with the performance metrics in AHRI Standard 410 as part of AHRI’s ACHC certification program. This standard was prepared by ASHRAE Standard Project Committee (SPC) 33. The cognizant technical committee is ASHRAE TC 8.4, Air-to-Refrigerant Heat Transfer Equipment.
ASHRAE Standard 33 2016 Edition prescribes laboratory methods of testing forced-circulation air-cooling coils, for application under non-frosting conditions, and forced-circulation air-heating coils to ensure uniform performance information for establishing ratings.
ASHRAE Standard 33-2016 Methods of Testing Forced-Circulation Air-Cooling and Air-Heating Coils![ASHRAE Standard 33-2016,ASHRAE 33,ASHRAE]()
content
content- SECTION PAGE
- Foreword
- Purpose
- Scope.
- Definitions
- Coil Classification
- Symbols
- Test Instruments and Calibration
- Test Apparatus
- Methods of Testing
- Test Procedure
- Data to be Recorded Calculations.
- Reference Properties and Data
- Normative References
- Informative References
- A: Test Data (TD) Forms
- B: Water-Side Pressure-Drop Measurement Procedure
- C: Method of Verification for Test-Stand Velocity and Temperature Uniformity
You can also read ASHRAE Laboratory Design Guide : Planning and Operation of Laboratory HVAC Systems 2nd Edition
ASHRAE Standard 33-2016 Methods of Testing Forced-Circulation Air-Cooling and Air-Heating Coils Purpose
1.1 The purposes of this standard are to:
- a. Describe and specify testing instruments and apparatus.
- b. Describe and specify laboratory test methods and procedures.
- c. Describe and specify test data t recorded.
- d. Describe and specify calculations made from test data.
- e. Define terms used in testing.
- f. Specify standard thermodynamic properties.
1.2 It is not the purpose of this standard to specify the types of tests used for production or field testing.
Comments are closed.